Microperforated Acoustic Veneer Stretcher

A seamless acoustic texture with microperforated acoustic veneer arranged in a stretcher pattern. The image represents a physical area of 802 x 802 mm (31.6 x 31.6 inches) in total, with each individual unit measuring approximately 400 x 400 mm. The joints are filled with mortar and are 1 mm (0 inches) in width.

The perforated timber acoustic crown cut veneer panel helps absorb sound, prevent unwanted acoustic reflections and limit reverberations, with the ability to be installed as both wall and ceiling panelling, or as individual sheets or planks to be installed on a variety of surfaces including doors. Acting as a Helmholtz Absorber, an air filled cavity behind the perforated surface acts as a resonator, while a layer of dense fabric or other such porous absorbent behind this absorbs; ‘trapping’ and dampening sound waves to reduce acoustic transmission. Tight-nit perforations such as this are typically better for domestic or lower-volume areas, as the ability to absorb is reduces the smaller the perforations.

This texture uses a running pattern also known as a stretcher bond. The stretcher bond is one of the most common bonds used in masonry construction and uses stretchers, bricks laid flat with their long edge parallel to the wall. Each alternating course is offset by a half stretcher.

This image is seamless, meaning it can be tiled repeatedly for use in architectural drawings and 3D models. It can be used as a SketchUp texture, Revit material or imported into Photoshop for use in 2D illustrations. You can download a high resolution version of this texture and a matching bump map or CAD hatch (compatible with AutoCAD and Revit) using Architextures Create with a Pro Subscription.